Academic Publications

Fully Refereed International Journal Papers (Science Citation Index -Expanded)

1. “Investigations on Blade Tip Tilting for Hawt Rotor Blades Using CFD”
Elfarra, Monier A.; Uzol, Nilay Sezer; Akmandor, I. Sinan
International Journal of Green Energy Vol.12 No:2, p125-p138, (2015)
2.  “NREL VI rotor blade: numerical investigation and winglet design and optimization using CFD”
Elfarra, Monier A.; Uzol, Nilay Sezer; Akmandor, I. Sinan
Wind Energy; Vol.17 No:4; p605-p626, (2014)
3.  “Experimental investigation of hinged and spring loaded rolling piston compressors pertaining to a turbo rotary engine”
M. Okur, I. S. Akmandor
Applied Thermal Engineering, Vol :31 No :6-7, pp.1031-1038, (2011)
4.  “Multi-Objective Aerodynamic Optimization of Axial Turbine Blades Using a Novel Multilevel Genetic Algorithm”
O. Oksuz, I. S. Akmandor
Journal of Turbomachinery-Transactions of the ASME Vol :132 No :4, ASME, (2010)
5.  “Characteristic Euler Shock-Fitting Formulation for Multi-Dimensional Flows”
E.A. Başeşme, I.S. Akmandor, A.Ş. Uçer
International Journal for Numerical Methods In Fluids, Vol.43, pp.319-343, (2003)
6.  “Aerodynamic Optimisation of Turbine Cascades Using an Euler/Boundary Layer Coupled Genetic Algorithms”
Ö.Öksüz, I.S.Akmandor, M.Ş. Kavsaoğlu
AIAA Journal of propulsion and Power Vol.18,No.3, pp.652-657, (2002)
7.  “Cell-Vertex Based Parallel and Adaptive Explicit 3D Flow Solution on Unstructured Grids”
E.Yilmaz, M.S. Kavsaoglu, H.U. Akay, I.S. Akmandor
International Journal of Computational Fluid Dynamics (IJCFD) Vol.14, pp. 271-286, (2001)
8.  “Mass Flux and Shock Jump Calculations Through Cryogenic Two-phase Nozzle Flow”
I.S. Akmandor, T. Nagashima
AIAA Journal of Thermophysics and Heat Transfer, Vol.14, No.3, pp.452-455, (2000)
9.  “Analytical Shock Jump Formulae for Cryogenıc Homogeneous Two-Phase Nozzle Flow” I.S.Akmandor, T.Nagashima
Transaction of the Japan Society for Aeronautical and Space Sciences (JSASS) Vol.43, No.140, pp.67-76, (2000)
10.  “Predictions for Cryogenic Homogeneous Two-Phase Flows in Choked Laval Nozzles”
I.S. Akmandor, T.Nagashima
AIAA Journal of Thermophysics and Heat Transfer, Vol.13, No.3, pp.355-363, (1999)
11.  “A Numerical Solution of 3D Inviscid Rotational Flow in Turbines and Ducts”
E.Oktay, I.S. Akmandor and A.S.Ucer
International Journal for Numerical Methods in Fluids ,Vol.26, No. 8, pp.907-926, (1998)
12.  “Newton-Raphson Solution of Cryogenic Homogeneous Two-Phase Flow in Convergent-Divergent Nozzles”
I.S.Akmandor, T.Nagashima
Transaction of the Japan Society for Aeronautical and Space Sciences (JSASS) Vol.40, No.127, pp.40-58, (1997)
13.  “Unsteady Internal Ballistic Calculation of Solid Rocket Motors”
H.T. Tinaztepe, I.S. Akmandor, A.S. Ucer
AIAA Journal of Propulsion and Power, Vol.8 No.5, pp.1125-1128, (1992)
14.  “Heat and Momentum Transfer in Laser Induced Decomposition of Silane Jets: Theory and Experiments”
I.S. Akmandor, J. Szekely and J.S. Haggerty
International Journal of Heat and Mass Transfer. Vol. 31.No. 11, pp. 2239-2249, (1988)

International Refereed Conference and Symposium Papers

1. “Coupling a Waste Heat Recovery Turbine to an Axial Compressor Boost Stage” Akmandor, I. S., Elfarra, M. A.
24th Conference on International Society for Air Breathing Engines (ISABE 2019), September 22-27, 2019
2. “Electrical Power Recovery from Gas Turbines Exhaust Waste Heat”
Akmandor, I. S., Okur, M.
24th Conference on International Society for Air Breathing Engines (ISABE 2019), September 22-27, 2019
3. “Analysis of Waste Heat Recovery Boosted Turboshaft for Land and Marine Applications”
Akmandor, I. S., Okur, M.
23th Conference on International Society for Air Breathing Engines (ISABE 2017), September 3-8, 2017
4. “Turbulent Combustion Modeling with Fully Coupled Fully Implicit Compressible Solver” Kalpakli, B., Öztürkmen, M. O., Akmandor, I. S.
AIP Conference Proceedings, Vol. 1648, Issue 1, p1-4, 4p, Publisher: American Institute of Physics., 2015
5. “Flow control with synthetic jet actuators under adverse pressure gradient laminar boundary layer”
Gul, M., Uzol, O., Akmandor, I.S.
32nd AIAA Applied Aerodynamics Conference, 2014
6. “Investigation And Optimization Of Winglets For HAWT Rotor Blades”
Elfarra, M. A., Akmandor, I. S., Uzol ,N. S.
The 9th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics (ETC 9), March 2011
7. “Pitch Angle Design Of NREL VI Wind Turbine Blade Using CFD”
Elfarra, M. A., Akmandor, I. S., Uzol ,N. S.,
CFD & Optimization ECCOMAS Thermatic Conference, May 2011
8. “Unmanned Air Vehicle Turbo Rotary Engine Preliminary Component Tests”
Akmandor, I. S., Okur, M.
4th International Symposium on Innovative Aerial/Space Flyer Systems, CoE The University of Tokyo , January 2008
9. “Multi-Objective Aerodynamic Optimization of Axial Turbine Blades using a Novel Multi-Level Genetic Algorithm”
Oksuz, O., Akmandor, I.S.
Proceedings of ASME Turbo Expo 2008: Power for Land, Sea and Air, GT2008-50521, June 2008
10. “Axial Turbine Blade Aerodynamic Optimisation using a Novel Multi-Level Genetic Algorithm”
Oksuz, O., Akmandor, I.S.
Proceedings of ASME Turbo Expo 2008: Power for Land, Sea and Air, GT2008-50519, June 2008
11. “Development of the Combustion Chamber of a Turbo-Rotary Engine”
Akmandor, I.S., Arabaci, E.
10th Intermational Combustion Symposium ICS, October 2008
12. “Experimental Investigation of Flames and Combustions of Bio-Fuels”
Karaca, M., Marangoz, A. Akmandor, I.S., Gunes, S.
10th International Combustion Symposium ICS, October 2008
13. “Two Dimensional Finite Volume Weighted Essentially Non- Oscillatory Scheme”
El-Farra M., Aktürk A., Akmandor I. S.
3rd Ankara International Aerospace Conference, AIAC-2005-047, Ankara, Turkey, 22-25 August 2005
14. “Two Dimensional Finite Volume Weighted Essentially Non- Oscillatory Scheme Using Different Flux Computations”
Aktürk A., El-Farra M., Akmandor I.S.
3rd Ankara International Aerospace Conference,AIAC-2005-097 , Ankara, Turkey, 22-25 August 2005
15. “Turbo-Rotary Compound Engine (TRCE) and Novel Thermodynamic Cycle”
I.S. Akmandor, T. Ercan, M. Karaca
GT2005-68234, ASME Turbo-Expo 2005 (June 2005)
16. “Turbine Blade Shape Aerodynamic Design Using Artificial Intelligence”
Ö. Öksüz, I.S. Akmandor
GT2005-68234, ASME Turbo-Expo 2005 (June 2005)
17. “Multi block unsteady navier stokes solution of compressor stator in rotor wake”
D. Gürak, I.S. Akmandor, M.S. Kavsaoǧlu
43rd AIAA Aerospace Sciences Meeting and Exhibit, Meeting Papers, pp. 3763-3772, 2005
18. “New Engine and Thermodynamic Cycle of Tusas Aerospace Industries Unmanned Air Vehicle”
I. S. Akmandor, T. Ercan, M. Karaca, G. Aran
International Symposium on Innovative Aerial/Space Flyer Systems, International Symposium Series on Mechanical System Innovation, The 21st Century, Center of Excellence Program of the University of Tokyo, December 10-11, 2004, Tokyo – Japan,
19. “Genetic Optimization of Steam Injected Gas Turbine Power Plants”
I.S. Akmandor, Ö.Öksüz, S.Gökaltun, M.H. Bilgin
GT-2002-30416, Proceedings of ASME’2002, 47th ASME Gas Turbines and Aeroengine Congress, Exhibition and User Symposium, June 3-6, 2002, Amsterdam – The Netherlands
20. “Performance Evaluation of an Internal Flow Navier-Stokes Solver for Compressible Viscous Flow Simulations“
H.T.Tinaztepe, A.Ş. Üçer, I.S. Akmandor
GT-2002-30681, Proceedings of ASME’2002, 47th ASME Gas Turbines and Aeroengine Congress, Exhibition and User Symposium, June 3-6, 2002, Amsterdam – The Netherlands
21. “Turbine Cascade Aerodynamic Optimisation Using an Euler Coupled Genetic Algorithm”
Ö.Öksüz and I.S.Akmandor
ISABE 2001-1234, Bangalore, India (2-7 September 2001) http://widget.ecn.purdue.edu/~isoabe
22. “Aerodynamic Optimisation of Turbine Cascades Using an Euler/Boundary Layer Coupled Genetic Algorithms”
Ö.Öksüz and I.S.Akmandor
AIAA-2001-2577, (June11-14, 2001)
23. “Adaptive Unstructured Grid Applications for Multi-element Airfoils”
Y.Ortakaya and I.S.Akmandor
AIAA-2001-2923, (June 11-14, 2001)
24. “A Parallel and Adaptive 3D Euler Solver on Unstructured Grids”
E.Yilmaz, H.U. Akay, M.S. Kavsaoglu and I.S. Akmandor
International Parallel CFD 2000 Conference, Trondheim, Norway (May 22-25, 2000), http://www.sintef.no/PCFD-2000
25. “Numerical Analysis of Rocket Turbopump Inducer at Cryogenic Homogeneous Two-Phase Flow Conditions”
I.S.Akmandor and T. Nagashima
AIAA 99-0874, presented at the 37th Aerospace Sciences Meeting and Exhibits Reno-Nevada (11-14/01/1999)
26. “Plume-free stream interactions in two-phase, hypersonic flows”
H.A. Carlson and I.S. Akmandor
AIAA 99-0675, presented at the 37th Aerospace Sciences Meeting and Exhibits Reno-Nevada (January 11-14, 1999)
27. “Numerical Solution of Solid Rocket Motors”
E.Ş. Taşkınoğlu and I.S. Akmandor
2nd Ankara International Aerospace Conference (AIA’98) Proceedings pp.362-372 (September 9-11, 1998)
28. “ Identification and Control of a Radial Turbojet with Neural Network and Fuzzy Logic”
S.Toprak, A.M. Erkmen, I.S. Akmandor
AIAA 98-1016 36th Aerospace Sciences Meeting and Exhibits Reno-Nevada (January 12-15, 1998)
29. “Quasi-3 Dimensional Analysis and Design of Turbomachinery Blades”
K.Ekici, I.S. Akmandor, T. Çetinkaya
AIAA 98-0966 36th Aerospace Sciences Meeting and Exhibits Reno-Nevada (January 12-15, 1998)
30. “Cryogenic Homogeneous Two-Phase Flows in Choked Laval Nozzles”
I.S. Akmandor, T.Nagashima
AIAA 98-0889 36th Aerospace Sciences Meeting and Exhibits Reno-Nevada (January 12-15, 1998)
31. “Airfoil Analysis for Horizontal Axis Wind Turbines”
I.S.Akmandor, K.Ekici
AIAA 98-0020, 1998 ASME Wind Energy Symposium, 36th Aerospace Sciences Meeting and Exhibits Reno-Nevada , pp.1-8 (January 12-15, 1998)
32. “Quasi-3 Dimensional Euler Analysis and Design of Turbomachinery Cascades“
O.Uzol, I.S. Akmandor
AIA’96 Proceedings of the Ankara International Aerospace Conference and Symposia pp-217-222 (September 1996)
33. “A Component Based Modeling Method for Steady State Performance Prediction and Diagnostics of Gas Turbines”
M. Arslanoglu, Y.A.Göğüş, I.S. Akmandor, E. Gunes, J.W. Bird
ISABE 97-7145, the 13th International Symposium on Air Breathing Engines, ISABE. Editor F.S. Billig, AIAA publications, p. 1073-1081. (September 7-12, 1997).
34. “Loss Prediction in Axial Flow Cascades Using a Navier-Stokes Solver”
H.T. Tinaztepe, I.S. Akmandor, A.S. Ucer
AGARD- CP-571 in Loss Mechanisms and Unsteady Flows in Turbomachines, 85th PEP Symposıum, pp18.1-18.13 Derby-UK (May 1995)
35. “Numerical Analysis of Vapor Liquid Two-Phase Flow by Using a TVD Scheme
S. Ishizaki, I.S. Akmandor, T. Nagashima
34th Aeroengine and Space Propulsion Conference Proceedings. Japan Society for Aeronautical and Space Science, (1994) pp.230-235 in Japanese
36. “Numerical Simulation of Ramjet and Scramjet Combustion Using Two Dimensional Euler Equations With Finite Rate Chemistry”
I.S. Akmandor, U. Arkun
ISABE-93-7083, Paper presented at the International Symposium on Air Breathing Engines, XI ISABE, Tokyo-Japan pp 846-855 ( September 19-24, 1993)
37. “Navier-Stokes Simulation of Two and Three Dimensional Jets in Crossflow, Effects of Grid and Boundary Conditions”
M.S. Kavsaoglu, I.S. Akmandor, S. Ciray, K. Fujii
(AGARD-CP-534) Paper presented at the 72nd Fluid Dynamics Panel Symposium on Computational and Experimental Assessment of Jets in Cross Flow, Winchester, UK, pp. 25.1-25.20, (April 19-22, 1993)
38. “Second Law Approach to Combustion in Ramjet”
A.Y. Gogus, I.S. Akmandor
Presented at the International Society for Air Breathing Engines, Xth ISABE, sponsored by AIAA,AAAF,DGLR,JSAS,Raes, Nottingham,UK pp.1313-1318, (September 1-6, 1991)
39. “Unsteady Internal Ballistic Calculation of Solid Rocket Motors”
H.T. Tinaztepe, I.S. Akmandor, A.S. Ucer
AIAA 91-2425 presented at the AIAA/SAE/ASME/ASEE 27th Joint Propulsion Conference and Exhibit, Sacramento, Ca. USA,(June 24-27, 1991)
40. “Three Dimensional Cascades and Secondary Flow calculations in Turbomachines”
I.S. Akmandor, H.Yagci, A.R. Aslan
AIAA 91-2467 presented at the AIAA/SAE/ASME/ASEE 27th Joint Propulsion Conference and Exhibit, Sacramento, Ca. USA (June 24-27, 1991)
41. “Two and Three Dimensional Solutions of Single Jet in a Cross-Flowi”
M.S. Kavsaoglu, I.S. Akmandor,S. Ciray, K. Fujii
AIAA 91-1743 presented at the AIAA 22nd Fluid Dynamics-Plasma Dynamics and Lasers Conference, Hawaii-Honolulu, (June 24-26,1991)
42. “Three Dimensional Solutions of Internal Flows Using a Cell Vertex Scheme”
E.Oktay, I.S.Akmandor, A.S.Ucer
Presented at the 77th symposium of the Propulsion and Energetic Panel. AGARD-CP-510 on ‘CFD Techniques for Propulsion Applications’ San-Antonio,Texas-USA, pp.27.1-27.14 , (May 1991)
43. “Simulation and Second Law Analysis of the Unsteady Combustion of a Non-Ideal Pulsating Ramjet.”
I.S. Akmandor, A.Y. Gogus
ISABE 89-7015, presented at the IXth International Symposium On Air-Breathing Engines Sept.3-8 1989, Athens-Greece , Conference proceedings pp. 155-170 (1989)
44. “A Computational Design Method for Shock Free Transonic Cascades and Airfoils”
T. Cetinkaya, I.S. Akmandor and A.S. Ucer
Paper presented at the 64th Fluid Dynamics Panel entitled “Computational Methods for Aerodynamic Design (Inverse and Optimization)” Loen-Norway 22-23 AGARD CP-463 pp. 10.1-10.10 (May 1989)
45. “Numerical Visualization of the Mixing Between Inert and Reacting Gas Flows”
I.S. Akmandor
Proceedings Intern.AMSE Conference on Modelling and Simulation,Istanbul-Turkiye June 29-July 1,1988 AMSE Press, Vol. 3D pp. 165-182 (1988)

A-Type National Journal Papers

1. “Özgün Türbo-Döngüsel Motor Tasarımı, İmalatı ve Performans Değerleri (in Turkish: Novel Turbo-Rotary Engine Design, Manufacturing and Performance Values”
Okur, M., Akmandor, I. S.
Sürdürülebilir Havacılık Araştırmaları Dergisi (2017), C2-S1, 19-25
2. “Innovations in Gas Turbine Technologies for Aircraft Gas Turbines and Electrogen Groups and Advances in Material, Surface Technologies and Production Processes (Part 2)”
M. S. Erdem and I. S. Akmandor
Mühendis ve Makina, No: 529, pp.38-45, February 2004. Published in Turkish
3. “Innovations in Gas Turbine Technologies for Aircraft Gas Turbines and Electrogen Groups and Advances in Material, Surface Technologies and Production Processes (Part 1)”
M. S. Erdem and I. S. Akmandor
Mühendis ve Makina, No: 528, pp.30-37, January 2004. Published in Turkish
4. “Velocity Measurements in Laser Driven Silane Reaction by Using a Perturbation Method”
I.S. Akmandor
Bull. of the Technical University of Istanbul, Vol: 41 pp. 51-59, (1988)
5. “Laser Induced Reaction of the Supersonic Silane Jet Coflowing With an Annular Argon Flow”
I.S. Akmandor
Bull. of the Technical University of Istanbul Vol: 40 No: 1, pp. 1-24, (1987)

National Conference Papers

1. “Wind Farm Optimization”
Yousefbeigi, S.; Akmandor, I. S.
Conference Proceedings of the International Symposium on Innovative Technologies in Engineering & Science , 2015, p600-609, 10p. Publisher: Sakarya University,
2. “SHF santrifüj pompalar için yatışkın (steady-state) akış kavitasyon modeli”
ElFarra, M. A., Akmandor, I. S., Nurşen, C.
Pomsad 7. Pompa Vana Kongresi, April 2011
3. “Yerli Rüzgar Türbini Kanat, Jeneratör Ve Kontrol Sistemi Tasarımı“
Elfarra, M. A., Aydogan, Z., Akmandor, I. S.
Ruzgar Enerjisi ve Ruzgar Turbinleri Yerel Sempozyumu, EMO Bandırma, TMMOB, March 2011
4. “Ultra-Verimli ve Ultra-Torklu Gaz Türbini Kanatçıkları”
Ö. Öksüz, I. S. Akmandor
Havacılıkta Ileri Teknolojiler ve Uygulamaları Sempozyumu, HITEK 2004, pp.1-7 (Aralık 2004)
5. “Gaz Türbinlerine Ait Kompresör ve Türbin Performans Haritaları Eşlenerek Çalışma Eğrileri Eldesi”
M. Karaca, I. S. Akmandor
Havacılıkta Ileri Teknolojiler ve Uygulamaları Sempozyumu, HITEK 2004, (Aralık 2004)
6. “Optimizing the Boost Performance of an Aircraft Gas Turbine with Water Injection”
I.S.Akmandor, Ö.Öksüz
Kayseri 4th Aeronautical Symposium Conference proceedings (May 2002)
7. “Numerical (ENO) Solution of a Travelling Vortex-Shock Interaction”
E.Sarigöl, I.S. Akmandor
Kayseri 4th Aeronautical Symposium Conference proceedings (May 2002)
8. “Space Rocket Launch Engines”
I.S.Akmandor, N. Ayaz
Global Space Activities and Potential in Turkey, ISBN 975-409-186-2, printed by Grafiker Ofset-Ankara, , pp. IV 334-339, (30-31 May 2001) (in Turkish)
9. “Navier-Stokes and Panel-Boundary Layer Applications to Multielement Airfoil Analysis”
Y. Ortakaya, S. Özdemir, I.S. Akmandor
Kayseri 3rd Aeronautical Symposium Conference proceedings pp. 366-373 (May 10-12, 2000)
10. “Low Speed Axial Compressor Test Set-up”
O. Çelebioğlu, I.S. Akmandor, Ö. Öksüz, Kayseri 2nd Aeronautical Symposium Conference Proceedings pp.227-231, (May 11-15, 1998)
11. “Modelling, Design and Test of a Jet Engine Combustion Chamber”
E.Bonacina, Y. Göğüş, I.S. Akmandor
Kayseri 1st Aeronautical Symposium Conference Proceedings pp. 205-210, (May 13-16, 1996)
12. “Design, Set-up and Test of a Small Gas Turbine Engine”
E.Saygi, I.S.Akmandor ans Y.A.Göğüş
Kayseri 1st Aeronautical Symposium Conference Proceedings pp. 197-294, (May 13-16, 1996)
13. “Fast Solution of Internal Flows by Newton-Raphson Methods”
O.Uzol, I.S. Akmandor, S. Karasoy
Turkish Air Force Academy 1st Aeronautical Symposium Proceedings pp. 155-162,Istanbul (June 9-10 1994) Published in Turkish
14. “An Implicit Flux Vector Splitting Method for the Solution of Quasi-1D Equations With Finite Rate Chemistry”
A.Arkun, I.S. Akmandor
Paper presented at the 10th Anniversary Symposium, Dept. of Aeronautical Engineering; METU. Conference Proceedings pp.285-298, (June 22-26, 1992).
15. “Three Dimensional Hot Wire Velocity Measurements Behind an Axial Flow Fan”
Y.Ayaz, I.S. Akmandor
Paper presented at the 10th Anniversary Symposium, Dept. of Aeronautical Engineering; METU. Conference Proceedings pp.132-143, (June 22-26, 1992)
16. “Combustion Stability in a One Dimensional Compressible Flow and Exergy Analysis”
A.Y. Gogus, I.S. Akmandor
Paper presented at the Second Combustion Symposium oganized by the Istanbul Technical University and Marmara University, September 18-20, 1989 Macka-Istanbul, Conference proceedings pp.123-133 (1989). Published in Turkish
17. “Computer Simulation of Solid Rocket Engines”
H.T. Tinaztepe, I.S. Akmandor and A.S.Ucer
Paper presented at the 2nd Combustion Symposium organized by I.T.U. and Marmara University, Sept.18-20, 1989, Macka-Istanbul, Conference proceedings p.283-291 (1989). Published in Turkish

Articles in Popular Technical Magazines

1. “The Technological Use of the Shock Waves After Detonation”
H.Hampel, M.L.Ovecoglu, I.S.Akmandor
Metal-Makina, No:13 pp.23-28 (1990). Published in Turkish
2. “Shaping Ceramic Turbo-engines With Injection Molding Techniques”
I.S. Akmandor
Metal-Makina No:1 pp.22-24 (January 1989). Published in Turkish
3. “Light Aircraft Design, Determination of Main Wing Dimensions and Parameters”
I.S. Akmandor
Ucanturk Vol:314, pp. 30-32 (July 1988). Published in Turkish
4. “Light Aircraft Design ,Load Distribution and Strength Design Factor”
I.S. Akmandor
Ucanturk Vol:313,pp. 4-5 (June 1988). Published in Turkish
5. “Light Aircraft Design II”
I.S. Akmandor
Ucanturk Vol:312,pp. 31-32 (May 1988). Published in Turkish
6. “Light Aircraft Design I”
I.S. Akmandor
Ucanturk Vol:311,pp28-29 (April 1988). Published in Turkish
7. “Ceramic Turbo-engines”
I.S. Akmandor
Ucanturk Vol:310, pp. 20-22 (March 1988). Published in Turkish
8. “Velocity Profile Measurements Using Laser Doppler Anemometry”
I.S. Akmandor
Ucanturk Vol:307, pp. 13-16 (July 1987). Published in Turkish

Unpublished International Presentations:

1. “Use of Novel Rotary or Thrust Augmentation Systems in Micro Vehicle Propulsion”
I.S. Akmandor
The 21st Century Center of Excellence Lecture in the University of Tokyo Department of Aeronautics and Astronautics, The University of Tokyo, July 27th 2004
2. “Improvement of Power and Efficiency Using a Novel Compound Rotary-Gas Turbine System”
I.S. Akmandor
The 21st Century Center of Excellence Lecture in the University of Tokyo Department of Aeronautics and Astronautics, The University of Tokyo, July 29th 2004.

Pars Makina

We provide reliable, economical, high-power and efficient innovative solutions in the fields of Transport, Defence, Aerospace, Aerospace Engineering and Clean Energy.